How to hide dash cam wires? ( Simple & Easy Ways )
If you’re looking to install a dash cam in your vehicle, you know that hiding the wires is one of the most difficult and time-consuming parts of the task. Hiding the wires can be tricky, but with a little patience and creativity, it’s possible to make your dash cam installation look neat and professional.
In this article, we’ll provide step-by-step instructions on hiding dash cam wires inside and outside your vehicle.
How to hide dash cam wires?
The Headliner:
Most people choose to install their dash cams near the rear review mirror, which is fine. But what if your car doesn’t have a good place to tuck the wire away? One solution is to run the wire along the headliner. This is relatively easy to do and a great way to keep the wire hidden.
Plus, it’s less likely to get damaged this way. Here’s a quick guide on how to run your dash cam wire along the headliner:
1. Start by removing the rearview mirror. This will give you easy access to the headliner.
2. Use a panel tool to remove the trim around the windshield. Be careful not to damage the trim.
3. Start at the car’s front, and run the wire along the headliner to the back. You can tuck it into the seam between the headliner and the car’s roof.
4. When you get to the back, run the wire down the pillar and into the trunk.
5. Reattach the trim and the rearview mirror.
This method is relatively simple and doesn’t require any special tools or materials. However, it’s important to ensure that the wire is tucked away securely so that it doesn’t become loose and fall down, which could cause damage to your vehicle.
The Pillars:
There are two main ways to route the power cord for your dash cam down the A-pillar. You can either take the passenger-side route or the driver-side route.
The passenger-side route is the more popular option, as it is generally considered to be easier and quicker. However, the driver-side route has its advantages and may be a better option in some situations.
Let’s take a closer look at both options, so you can decide which one is right for you.
The passenger-side route is often considered the easier of the two options. This is because the passenger side generally has more space to work with, making it easier to tuck away the wires. Additionally, this route is often less visible from the outside of the car, making it a good choice if you’re worried about aesthetics.
However, the driver side route has its own advantages. For one, reaching the cigarette lighter outlet on the driver’s side is often easier, making it a more convenient option if you need to regularly plug and unplug your dash cam. Additionally, this route is often more hidden from view, making it a good choice if you’re concerned about security.
Ultimately, the best route for you will depend on your specific needs and preferences. If you’re unsure which is best, we recommend trying both and seeing which works better for you.
Use gum tape:
If you have ever seen a car with its wires hanging out from under the dashboard, you know how unsightly it can be. Not only is it an eyesore, but it can also be dangerous. If the wires are not properly secured, they could come loose and get squashed when the door is shut.
This could cause a short circuit and potentially start a fire. To avoid this, you can use gum tape to secure the wires in place. Gum tape is an adhesive tape designed to stick to surfaces without leaving a residue. It is also very strong and can withstand a lot of force. This makes it ideal for securing wires in place.
Peel gum tape off a strip and wrap it around the wire. Make sure the tape is tight so that it doesn’t come loose. You can also use it to secure the wires to the side of the dashboard or other surfaces.
If you are not using gum tape, you can also use zip ties or other similar devices.
Just ensure the wires are secure so they don’t come loose and get squashed when the door is shut. The other advantage of gum tape is that it is very easy to use. All you need to do is peel off the backing and then stick it to the desired location.
Once it is in place, it will securely hold the wires in place so they cannot come loose. If you are looking for a way to hide your dash cam wires, then gum tape is a good option. It is easy to use and keeps your wires in place even in extreme conditions.
Can you use a dash cam without wires?
Most dash cams on the market require some wiring to draw power. This is typically done by connecting the dash cam to the cigarette lighter port or some other power source in the vehicle. While this is the most common way to power a dash cam, other options don’t require any wiring.
One option is to use a battery pack. This is a portable battery that you can plug the dash cam into, and it will power the camera. The advantage of this option is that it’s completely wireless and can be used in any vehicle. The downside is that the battery will need to be charged regularly and may not last as long as a wired connection.
Another option is to hardwire the dash cam to the vehicle’s electrical system. This can be done by a professional or by someone with experience in electrical work. The advantage of this option is that it will provide a constant power supply to the dash cam. The downside is that it can be difficult to install and may not be an option in all vehicles.
Conclusion:
Hiding your dash cam wires can be difficult, but with some ingenuity and some supplies, you can do it. By following these tips, you can keep your recordings safe and private. So whatever you decide to do with your dash cam footage, make sure to take care of them properly.
related posts:
How To Format SD Cards For A Dash Cam?
