How To Remove Dash Cam From Car?

Are you tired of dealing with a faulty dash cam in your car? It’s time for an upgrade, or you must send it in for repairs. Either way, learning how to correctly remove a dash cam from your vehicle is essential knowledge every car owner should have. 

This article will give a complete step-by-step guide on removing your dash cam without causing any harm or complications. So, how do you Remove the Dash Cam From a Car? Keep reading – we’ve got all the answers!

Tools You Will Need

Before you can start to remove the dash cam from your car, you need to make sure that you have the following tools:

• A Set of Nose Pliers:

Nose pliers are essential for gripping and manipulating small connectors and wires.

• Flathead and Phillips Head Screwdrivers:

These screwdrivers come in handy for removing screws and securing panels or components.

• Different Size Trim Tools (Preferably Plastic Ones):

Plastic trim tools help pry apart interior panels, trim pieces, and clips without damaging or scratching your car’s surfaces.

• Heat Gun (You Can Also Use a Hair Dryer):

A heat gun or hair dryer helps soften the adhesive and makes removing components like adhesive-backed mounts or cable clips easier.

• Safety Goggles:

Safety goggles save your eyes from debris, dust, or small parts that may become dislodged during removal.

• A Pair of Gloves:

Wearing gloves helps keep your hands washed and protected, especially if you encounter adhesives or sharp edges while removing the dash cam.

These tools will make removing a dash cam from your car more efficient and safer. Always exercise caution and take your time to avoid any damage to your vehicle or the dash cam itself during the removal process.

Step-By-Step Guide on How To Remove Dash Cam From Car?

Removing a dash cam from your car may seem daunting, but with the right tools and instructions, it’s quite simple.

Locate and disconnect the wires from the fusebox.

First, locate the fuse box down the dashboard or engine compartment. Once found, it’s essential to identify which fuses are connected to your dash cam and ensure you have the right tools handy before proceeding.

Before removing any wires, make sure to turn off your car’s ignition to avoid any accidents or electrocution. It’s also recommended to wear protective gloves as an extra safety precaution. 

To disconnect the wires from the fusebox, gently pull out each fuse that corresponds with your dash cam until you find the one that powers it. Once identified, carefully remove that particular fuse by using a pair of pliers or pulling it out with your fingers if possible.

Carefully remove the trim in the interior.

Once you have all your tools ready, locate the clips holding the trim. They are typically located along the sides or bottom edge of the trim piece. Gently insert the panel removal tool or flathead screwdriver into one of these clips and apply gentle pressure until you hear a click. This means the clip has been released, and you can now remove all the other clips.

As you work your way around each clip, be sure to pull gently on the trim piece as well to prevent any unnecessary damage. Once all the clips have been released, carefully lift up one corner of the trim piece and continue lifting until it is completely removed from its position. 

Remove the dash cam from the windshield.

Carefully remove it from the windshield once you have access to the dash cam’s mounting. Depending on your dash cam model, it may be attached using adhesive, suction cups, or a bracket.

If it’s held in place with adhesive, you may be required to use a heat gun or hair dryer to dull the glue, making it easier to peel off. Be cautious not to overheat the area, as it can damage the windshield.

If your dash cam is secured with suction cups or brackets, gently release the mounting mechanism, ensuring not to apply excessive force that might damage the windshield or the dash cam.

Disconnect any remaining wires connected to the dash cam as you remove it.

Following these steps, you can carefully and effectively remove your dash cam from your car’s windshield and interior. Remember to take your time, use the appropriate tools, and exercise caution to avoid damaging your vehicle or the dash cam during removal.

Frequently Asked Question

What if I can’t locate the wires connected to the dash cam?

If you need help finding the wires, review the installation manual or consult the manufacturer’s support resources. In some cases, a professional installer can assist you.

Can I reinstall the dash cam in another car after removing it from one vehicle?

You can typically reinstall a dash cam in another vehicle if it’s compatible with the new vehicle’s windshield and power source. Remember that the new installation may require additional adhesive mounts or accessories.

Can I reuse the adhesive mount after removing the dash cam?

In most cases, adhesive mounts are designed for one-time use, and reusing them may reduce adhesion. Using a new adhesive mount is generally recommended if you plan to reinstall the dash cam in another location.

Final Thoughts: How To Remove Dash Cam From Car?

Removing a dash cam from your car can be easy if you follow the necessary steps. Start by locating and disconnecting the wires from the fusebox to ensure safety. Then, carefully remove the trim in the interior to access the dash cam. Finally, gently detach the dash cam from the windshield, being cautious not to damage any components or surfaces. 

Following these steps, you can replace your dash cam or store it safely when needed. Remember to exercise caution and refer to your specific car model’s manual for additional instructions.